Us Type Wire Rope Clip Fist Grip Clips

• Customization: Available
• Material: Carbon Steel
• Usage: Wire Rope Clamp
• Model NO.: Grip Clips
• Standard: Standard
• Condition: New
• Brand: OEM
• Treatment: Quenched and Tempered
• Test: Individully Proof Tested
• Application: Used in Lifting Operation
• Standard Required: Us Standard
• Process: Drop Forged
• Surface: Hot Deep Galv
• Lead Time: 40days
• Transport Package: Bags/Pallets
• Specification: 1/8- 2 1/4
• Trademark: OEM
• Origin: Zhejiang
• HS Code: 73269090
• Production Capacity: 2000 Ton

Product Description

Rope Size	C	D	E	G	N	WT (lbs)
3/16" - 1/4"	0.40	0.94	0.38	1.41	1.44	0.23
5/16"	0.47	1.06	0.38	1.50	1.54	0.28
3/8"	0.51	1.06	0.44	1.84	1.78	0.40
1/2"	0.59	1.25	0.50	2.21	2.15	0.62
5/8"	0.72	1.50	0.63	2.72	2.57	1.03
3/4"	0.86	1.81	0.75	2.94	2.67	1.75
7/8"	0.97	2.12	0.75	3.31	2.86	2.25
1"	1.13	2.25	0.75	3.72	3.06	3.00

 
3/16 inch - 1 inch Diameter
Wire rope clips are fittings used to make an eye or join two cable or wire rope ends together. They are a simple fitting that can be installed in the shop or in the field. There are three basic types of steel wire rope clips - Drop forged, malleable iron and fist grip types. The intended application for the wire rope or cable should determine which type to use.
For important or critical applications and if to be used in overhead lifting or suspending, always use standard drop forged type and drop forged fist grip type clips. Never use a malleable iron type clip for these applications.
The components of wire rope clips are the saddle, the bolt(s) and the nuts.
Forging is the practice of heating a piece of steel and hammering it to shape. Doing this gives the steel linear grain structure and greater strength. In the drop forged clips, the saddles are the parts that are drop forged. The saddles of malleable iron clips are made from a grade of steel with poorer strength qualities and is cast into shape and therefore, has a granular microstructure and not linear. This means the cast malleable saddle can yield under greater loads and cause the wire rope or cable to slip through and potentially fail. In general, forging is stronger than a casting.
For clips to work properly and gain their design efficiency (see charts), both the minimum number of clips required and the nuts must be torqued to the prescribed foot/pound rating.
In drop forged and fist grip type clips, the saddle pieces are hot dip galvanized and the bolts and nuts are electro-galvanized (zinc plated). With malleable clips, the saddles, u-bolts and nuts are electro-galvanized.
All three types of clips that E-Rigging sells conform to U.S. Federal Specification FF-C-450. It should be noted that stainless steel wire rope clips do not conform to this federal specification.
Our Service," Your Safety, Customers Satisfaction, Our Pursuit ". To provide the most suitable products and pragmatic services is our firm belief. We can design and manufacture varies of products according to customers requirements. We have been putting the priority to the QUALITY, SINCERITY, EFFICIENCY, and SERVICE. 

Sincerely wish long-term cooperation between you and us. Warmly welcome to our company for a visit.
For More information, please visit our website: grandlifting.en.made-in-china.com
Our products include: lever block, push trolley & geared trolley, I beam clamp, lifting clamp,  snatch block,  webbing sling, endless type webbing sling, round sling, cloverleaf slings, slings bags, grade 80 chain and chain sling, chain fittings, ratchet tie down, ratchet straps, cargo lashing, ratchets, ratchet type load binder, lever load binder, hand winch, hand puller, winch strap, tow straps,  logistic strap,winches, rigging hardware, marine hardware, anchors, anchor chains, turnbuckles, shackles, stainless steel rigging, etc.

Please do not hesitate to contact us, if there are any questions or enquiries.

----------------FAQ--------------
 

Q1: Does your workshop have products in stock?

A1: Yes, we have. But we only have standard-sized products; if you need customized products, it will take some time to manufacture them.

 

Q2: Whether you can offer customized service?

A2:  Yes, the working condition of every customer is different. All of our products can be customized depending on customers' requirements. Please give us the information as straightforward as you can, so we can provide our best design to suit your demands.

 

Q3: How to confirm the working class of the crane?

A3: Please offer us the working environment, working duration, and frequency of the crane, and our engineer shall calculate it for you.

 

Q4: What kind of package for the hoist?

A4: Hoists and Electricals packed in wooden fumigation box. The main beams are covered by woven plastic cloth.

 

Q5: What kind of assistance can you offer with equipment installation?

A5: We have a professional installation team who has gone to many countries to assist with the installation. If you need us to send a technician to your factory, please let us know.

 

Q6: What payment terms can you accept?

A6: Our also supports L/C, D/A, D/P, T/T, Western Union, and MoneyGram payments. For example, FOB NINGBO, CIF, DDU, EX WORKS, etc.