Gold Member Since 2015
Audited Supplier
Ningbo Grandlifting Co., Ltd.

G100 Chain Connector, G100 Connecting Link, G100 Master Link manufacturer / supplier in China, offering 4: 1 European Type Alloy Steel G100 Chain Connector, 20 Tons Red Container Hook, Ce Certification Mini Electric Hoist Electric Chain Hoist, Hoist and so on.

(/ )

Supplier Homepage Product G70 G80 G100 Components G100 Alloy Fittings 4: 1 European Type Alloy Steel G100 Chain Connector

4: 1 European Type Alloy Steel G100 Chain Connector

FOB Price: US $1.5 / Piece
Min. Order: 200 Pieces
Min. Order FOB Price
200 Pieces US $1.5/ Piece
Get Latest Price
Port: Ningbo, China
Production Capacity: 200000 PCS
Payment Terms: L/C, T/T, D/P, Western Union

Request a custom order and have something just for you!

Send Customized Request
Basic Info
  • Model NO.: G100 chain Connector
  • Maximum Capacity: 28t
  • Process: Drop Forged
  • Application: Used in Lifting Operation
  • Trademark: OEM
  • Specification: 2.5T to 28T
  • HS Code: 73269090
  • Safety Factor: 4:1
  • Treatment: Quenched and Tempered
  • Test: Individully Proof Tested
  • Surface Finish: Powder Plastified
  • Transport Package: Individual Plastic Bag /Cartons/Pallets
  • Origin: Zhejiang
Product Description
China G100 Droped Forged Alloy  chain connector 
Forged super alloy steel - quenched and tempered.
Suitable for G100 chain.
25% stronger than G80.
Key Specifications/Special Features:
Size: 10-10 to 72-10mm
The welded type is also available
Breaking load: 4 x WLL
Made of alloy steel

Inspection Before Use
The pre-use check for hooks should cover the following:
1. The WLL should be clearly marked.
2. The safety catch should be in place and functioning correctly.
3. The hook should be checked for any distortion, cracking and excessive wear or corrosion.
NOTE: The wear on the bearing surface of the hook should not exceed 8% of the nominal dimension.
4. Check that the opening of the hook is within the manufacturers parameters. If the hook is opened excessively it is a sign that it has been point loaded or overloaded.
5. Moving parts such as release cams should be checked for free movement.
6. If the hook is a ball bearing swivel hook check that the hook is swivelling freely and that the bearing is not making any unusual noises. Unusual noises are often a sign of bearing fatigue or bearing failure.
7. If the hook has a threaded machined shank ensure that the thread is in good order and that the nut is turning freely on the thread

Care in Use
1. For hooks used in frequent load cycles or pulsating loads, the hook and threads should periodically be inspected by Magnetic Particle or Dye Penetrant. (Note: Some disassembly may be required. )
2. Never use a hook if its throat opening has been increased, or its tip has been bent more than 10 degrees out of plane from the hook body, or is in any other way distorted or bent. Note: A safety catch will not work properly on a hook with a bent or worn tip.
3. Never use a hook that is worn beyond a recommended maximum of 8%.
4. Remove from service any hook with a crack, nick, or gouge. Hooks with cracks, nicks, or gouges shall be repaired by carefully grinding lengthwise, following the contour of the hook, provided that the reduced dimension is within the 8% wear limit.
5. Never repair, alter, rework, or reshape a hook by welding, heating, burning or bending.
6. Never side load, back load, or tip load a hook.
7. Eye hooks, shank hooks and swivel hooks are designed to be used with wire rope or chain. Efficiency of an assembly may be reduced when used with synthetic material.
8. Always make sure the hook supports the load. The catch must never support the load.
9. When placing two sling legs in a hook, make sure the angle from the vertical to the outermost leg is not greater than 45 degrees, and the included angle between the legs does not exceed 90
10. The WLL of a hook applies only when the load is correctly positioned on the load line of the hook. If the hook is eccentrically loaded, or the load is applied other than on the load line, the WLL is greatly reduced.
11. Always use a swivel hook, or insert a swivel link between the load hook and the lifting rope, when the load has a tendency to rotate when lifted.
12. Always check to ensure that the hook safety catch has closed correctly before allowing the load to be lifted

 Grandlifting Group specialist services for lifting equipment, height safety and rigging equipment to a large range of customers worldwide, from government organizations,
We pride ourselves on offering highest quality engineering and materials, genuine customer focus and safety first, without compromise, Our aim is to provide a professional, quality driven and competitive service, tailored to our clients' needs by our dedicated team of office based staff and engineers.
For more info, pls visit us on our web page:

Send your message to this supplier
Mr. Yan Yuan
To: Mr. Yan Yuan

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now