G70 Eye Hook for lashing chain /lashing chain C Hook
- Special specification and marks can be made according to customers
- Packing: Packed in cartons with plastic bags inside on iron pallets
- full tracebility
Care in Use
1. For hooks used in frequent load cycles or pulsating loads, the hook and threads should periodically be inspected by Magnetic Particle or Dye Penetrant. (Note: Some disassembly may be required. )
2. Never use a hook if its throat opening has been increased, or its tip has been bent more than 10 degrees out of plane from the hook body, or is in any other way distorted or bent. Note: A safety catch will not work properly on a hook with a bent or worn tip.
3. Never use a hook that is worn beyond a recommended maximum of 8%.
4. Remove from service any hook with a crack, nick, or gouge. Hooks with cracks, nicks, or gouges shall be repaired by carefully grinding lengthwise, following the contour of the hook, provided that the reduced dimension is within the 8% wear limit.
5. Never repair, alter, rework, or reshape a hook by welding, heating, burning or bending.
6. Never side load, back load, or tip load a hook.
7. Eye hooks, shank hooks and swivel hooks are designed to be used with wire rope or chain. Efficiency of an assembly may be reduced when used with synthetic material.
8. Always make sure the hook supports the load. The catch must never support the load.
9. When placing two sling legs in a hook, make sure the angle from the vertical to the outermost leg is not greater than 45 degrees, and the included angle between the legs does not exceed 90 Degrees.
10. The WLL of a hook applies only when the load is correctly positioned on the load line of the hook. If the hook is eccentrically loaded, or the load is applied other than on the load line, the WLL is greatly reduced.
11. Always use a swivel hook, or insert a swivel link between the load hook and the lifting rope, when the load has a tendency to rotate when lifted.
12. Always check to ensure that the hook safety catch has closed correctly before allowing the load to be lifted
| ITEM NO |
M.B.S |
O.L. |
O.W. |
N.W. |
| lbs |
mm |
mm |
kg |
| ZHG70-EHF-1 |
22000 |
151 |
94 |
0.53 |
| ZHG70-EHF-2 |
34000 |
182 |
113 |
0.85 |
| ZHG70-EHF-3 |
44000 |
208 |
122 |
1.12 |
All our activities are accredited to ISO 9001 and based on delivering the highest quality possible, both in products and services, ensuring longterm benefits and optimum performance.
Also we got the below certification: CE GS SUV, LR ABS ( anchors and anchor chains) Our rigging hardware is manufactured under exceptional quantity control and strictly adhered to the US, DIN, JIS, BS and AS standards.
About sample: Cost with free If the quantity small, and the express charge account into buyer's, after receiving the official order, the seller deducts it in first order's
Please do not hesitate to contact us, should there be any questions or enquires.
Welcome to look througth our website: grandlifting.en.made-in-china.com
Audited Supplier 
){kind=link}